Wonderflex

Need help with sewing techniques, or making a 10 ft sword? Seek help from other cosplayers here!
Post Reply
Neko Hoshi
Posts: 5
Joined: Fri Nov 02, 2007 8:50 pm

Wonderflex

Post by Neko Hoshi » Sun Nov 04, 2007 3:10 pm

A couple of costumes I'm thinking of doing would need wonderflex. Having never used it before, I don't know where to get it... Could someone please tell me:

a) how to get it
b) what else I'll need in order to work with it

Thanks! ^_^
The sky has more leg room.

User avatar
Animeisha
Posts: 8
Joined: Tue Oct 07, 2003 8:54 am
Location: Columbus, OH
Contact:

Post by Animeisha » Thu Nov 08, 2007 11:40 am

I believe you can get it here:


http://cosplaysupplies.com/wonderflex/wonderflex.html

From what I understand, you'd need a heat gun, or you could use boiling water to heat mold it.

I've only worked with PVC plastic, so I don't know much about wonderflex, but here's an intro to it!

http://www.cosplaysupplies.com/wonderfl ... exFAQ.html

Neko Hoshi
Posts: 5
Joined: Fri Nov 02, 2007 8:50 pm

Post by Neko Hoshi » Thu Nov 08, 2007 12:27 pm

Animeisha wrote:I believe you can get it here:


http://cosplaysupplies.com/wonderflex/wonderflex.html

From what I understand, you'd need a heat gun, or you could use boiling water to heat mold it.

I've only worked with PVC plastic, so I don't know much about wonderflex, but here's an intro to it!

http://www.cosplaysupplies.com/wonderfl ... exFAQ.html
^_^ Thank you!
The sky has more leg room.

JaclynGFC
Posts: 8
Joined: Fri Nov 02, 2007 12:24 pm
Location: NOLA

Post by JaclynGFC » Sat Nov 10, 2007 7:09 am

wonderflex is really nice, but be careful if you live in a hot climate. It is made flexible with heat, so if it is hot outside, or in the trunk of a car, and you're using it for something that doesn't have a stiff frame underneath the wonderflex, it can and will deform itself.

Really all you need to shape it is a hair dryer and time and patience, but a heat gun, which gets hotter than a hair dryer would probably cut the time down, but may up the patience factor.

Post Reply